LED strip with 5050 LEDs. High efficiency band. Thanks to the higher operating voltage, even larger amounts of tape can be easily obtained, for example. one dimmer behind it because the current is half as low as the 12 V tape of the corresponding power. The strip is also heated when the current remains lower.
To be mounted on an aluminium strip for cooling
We produce these strips at a high CRi value of > 90, even if the 80 is already very sufficient. Use 24 volts whenever possible, efficiency is much better and warming lower. Indoors and inside the profile, it’s always a good idea to use a dry space tape (IP20)
All models have Taiwanese LED chips and properly designed tape, good efficiency.
|Led||SMD chip 5050|
|Angle of light||120°|
|Lumen||About 800 lm/m|
|Number of LEDs||30/m|
|Double-sided tape||3M 300 LSE|